Skip to content

Amaiden Energy Nigeria Limited Job Recruitment (14 Positions)

Amaiden Energy Nigeria Limited Job Recruitment (14 Positions)

Amaiden Energy Nigeria Limited

Amaiden Energy Nigeria Limited Job Recruitment (14 Positions)

Amaiden Energy Nigeria Limited (formerly Moody International Nigeria Limited) was established in 1996 as a partnership between Moody International Group and Nigerian investors. Since commencing operations in March 1997 the company continues to grow and exerts its presence in numerous Projects in the Nigeria Oil and Gas Industry.

We are recruiting to fill the following positions below:

1.)?Marine Engineer III

Location:?Nigeria
Category: Others
Job Type: Contracts
Job Nature: Standard

Main Functions

  • Evaluate and comment on discipline engineering work performed both internally and by Contractors and subcontractors to ensure that work is being executed in accordance with Company specifications, company standards, and regulatory requirements.
  • Facilitates effective execution of discipline engineering and design routines that align with the team’s goals, objectives, and procedures. Assures accurate and timely communication among the team and other company Functions on discipline engineering activities, progress, and issues.
  • In addition to technical ability, they should demonstrate sound communication, facilitation, and interpersonal skills.

Tasks & Responsibilities

  • Prepare technical reports for use by engineering, management, or sales personnel.
  • Maintain contact with, and formulate reports for, contractors and clients in order to ensure completion of work at minimum cost.
  • Coordinate activities with regulatory bodies in order to ensure repairs and alterations are at minimum cost, consistent with safety.
  • Procure materials needed to repair marine equipment and machinery.
  • Act as liaisons between ships’ captains and shore personnel in order to ensure that schedules and budgets are maintained, and that ships are operated safely and efficiently.
  • Check, test, and maintain automatic controls and alarm systems.
  • Maintain records of engineering department activities, including expense records and details of equipment maintenance and repairs.
  • Perform monitoring activities in order to ensure that ships comply with international regulations and standards for life saving equipment and pollution preventatives.
  • Prepare plans, estimates, design and construction schedules, and contract specifications, including any special provisions.
  • Schedule machine overhauls and the servicing of electrical, heating, ventilation, refrigeration, water, and sewage systems.

Job Requirements
Skills and Qualifications:

  • Bachelor’s or Master’s Degree in Marine or Civil Engineering or related Engineering specialty, or equivalent professional experience
  • Extensive knowledge of discipline design standards, specifications, codes, and appropriate safety criteria
  • Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
  • Proficient in Microsoft Office suite of software programs
  • Read, write, and speak fluent English, especially as it applies to technical and business communications

Application Closing Date
30th November, 2023.

Method of Application
Interested and qualified candidates should:
Click here to apply online

2.)?Maintenance Supervisor -? Mechanical

Location:?Bonny Island, Rivers
Category: Others
Job Type: Contracts
Job Nature: Standard

Job Purpose / Objective

  • Delivery of a robust CMMS (Computerized Maintenance Management System) in a project is a critical enabler of the facilities Availability figures that underpin the project investment case (Production Promise, Production profile/ LNG throughput/annum).
  • A robust CMMS (Computerized Maintenance Management System) is evidenced by a comprehensively implemented Preventive Maintenance program that covers all the Safety and Production critical equipment and commences prior to the RFSU (Ready for Start Up) date.

The Purpose of the job is:

  • To ensure a Mechanical discipline-focused fully populated Computerized Maintenance Management System (CMMS) is in place for use by company for the commissioning and start-up phase of the project.
  • The Maintenance Management System will provide the asset team with accurate and relevant data to support the Maintenance and Integrity processes including; preventive and corrective maintenance, inspection and corrosion management, integrity assurance of Safety Critical Elements, and integrity and cost performance
  • To manage the MRTA (Maintenance & Reliability Improvement and Turnaround) (Mechanical discipline) scope of project from detailed design through Commissioning and Startup

Main Accountabilities

  • Accountable for Mechanical aspect of detailed planning (L3/4) of Computerized Maintenance Management System (CMMS) build scope), KPI?s (Key Performance Indicator) and progress measurement indicators. The CMMS (computerized maintenance management system) scope includes SAP-PM, Spares and BOM in SAP-MM, Inspection/Corrosion management in S-IMS and quality interface with supporting systems including s-RBI, s- RCM, w-SIFPRO, AVEVA, SAPDMS/SharePoint,
  • Supervisor of Mechanical discipline aspect of the project?s MRTA (Maintenance & Reliability Improvement and Turnaround) within ORCSU (Operations Readiness, Commissioning and Startup) Participate in all Maintenance Assurance-related reviews like Operability & Maintainability Workshop, Reliability Centered Maintenance Workshop etc.
  • Assist the Service contract holder for CMMS (Computerized Maintenance Management System) build services (TA CTR and CMMS (Computerized Maintenance Management System) contractor call-off contract).
  • Assist the Service contract holder for MM/BOM (Material Management/Bill of Material) build services (TA CTR and MM/BOM (Material Management/Bill of Material) contractor call-off contract).
  • Accountable for the Mechanical-related project MRTA (Maintenance & Reliability Improvement and Turnaround)
  • Responsible for determining the level of Mechanical-related aspect of Maintenance, Inspection, and Engineering activity necessary to meet reliability, availability, and plant life objectives (Production Promise).
  • Provide accountability for the new Mechanical Maintenance workshop and mechanical aspect of the project infrastructure facilities (Workshop, warehouse, passenger terminals,
  • Interface with company?s Asset Maintenance, Maintenance Support Services, and other departments on Mechanical Maintenance aspect of
  • Accountable for full compliance with local HSE standards, regulations, permit & consents
  • Work within the Project and Asset teams to implement the Mechanical aspect of MRTA (Maintenance & Reliability Improvement and Turnaround) related standards and
  • Review all Maintenance related project deliverables (with bias for Mechanical discipline), HSE Procedures and providing feedback for final
  • Jointly accountable for setting up the Spare Parts and Special Tools Management for Project and ultimate delivery to
  • Ensure that the aspect of Mechanical Maintenance of Project is implemented in compliance with Governmental regulations and Company Technical and Health, Safety, Security & Environmental (HSSE)

Job Requirements
Education:

  • Minimum of B.Sc Degree or HND in Mechanical Engineering

Experience:

  • 10+ years? experience in MRTA (Maintenance & Reliability Improvement and Turnaround) in the Oil and Gas industry, at least 2 of which will have been in a major project environment.
  • Extensive field experience in managing Maintenance systems setup and delivery in project or in an asset
  • Previous role will require experience in a similar role in major project delivery or asset involving complex processing, new technologies, change management/ business
  • Solid technical knowledge of maintenance management with MIE (Maintenance & Integrity Execution) best practices and a hands-on approach to implementing planning and scheduling activities as part of coaching maintenance.

Application Closing Date
29th December, 2023.

Method of Application
Interested and qualified candidates should:
Click here to apply online

3.)?Port Operations Officer – Onne

Location:?Rivers
Category: Supply Chain
Job type: Contract
Job Nature: Standard

Description

  • Serve as focal point of all Agents activities at the Federal Ocean Terminal (FOT)
  • Liaise with Port Operators in all TUCN shipping interest ? viz Intels, BRAWAL, NPA, OGFZA, Customs etc
  • Participate in all pre-cargo discharge meetings ahead of berthing with port operators and shippers? agents.
  • Assist, maintain & register equipment deployed for operations by port operators, and sign-off related job sheets.
  • Ensure all key transaction elements, Customs documentation of all cleared cargoes are maintained.
  • Liaise with Operations Personnel at Onne and provide appropriate Customs clearance documents on demand.
  • Assist and maintain an efficient container tracking system with all parties for the control of demurrage.
  • Liaise with Head of Yards for stacking spaces prior to the arrival of vessels with TUCN cargoes.
  • Ensure deliveries are made promptly, maintain/dispatch copies of waybills, and ensure transfers to the warehouse receiving section.
  • Assist & ensure correct delineation of cargoes awaiting Customs examination/inspection.
  • Ensure that delivery documents are dispatched promptly for data updates and PO file closures.
  • Supervise and take reports of activities of our marine cargo surveyors for insurance purposes
  • Ensure that all activities are carried out in accordance with our HSE policy
  • Report weekly & monthly activities carried out at Onne FLT port.
  • Liaising with Operations personnel at Onne and providing appropriate customs clearance documents on demand.
  • Update of Transit Tracker with POD information and follow up with ONNE Reception Team.
  • Any other activity or job function assigned to me by the Manager of the Department.-To be accountable for timely delivery of materials at COMPANY warehouses
  • Ensure that all transactions of shipments are carried out in compliance with Nigerian laws and company policies
  • Ensure that all COMPANY HSE rules and regulations are observed.
  • Liaise with Foreign freight forwarder, Local Freight forwarder and User Department
  • Provide Transit support for all Oil and Gas equipment, general services and medical equipment.

Job Requirements

  • Graduate in Management or Social Sciences with at least 2 years? experience in C&P, Transit, and or Logistic Operations.
  • Knowledge of UNISUP, MS Excel, MS word, Power Point.

Application Closing Date
15th November, 2023.

How to Apply
Interested and qualified candidates should:
Click here to apply online

4.)?Port Operations Officer – Ladol

Location:?Lagos, Nigeria
Category: Supply Chain
Job type: Contract
Job Nature: Standard

Description

  • Liaising with Port Operators, agencies, authorities and other FZEs on all Company Shipping interests i.e., LADOL, NEPZA, GRMFZC, LILE,
  • SHI-MCI FZE etc.
  • Liaising with all Company appointed Freight Forwarders / Shipping Agents at LADOL FZE
  • Responsible for the immediate handling and follow up on Nigeria Customs Service for company customs clearance operations at the LADOL
  • FZE Amaiden Energy Nigeria Limited Job Recruitment (14 Positions)
  • Ensuring proper delineation, warehousing, and protection of all goods under Customs clearance.
  • Working closely with the Port Techlog personnel on material management (handing over and transfer) after customs clearance
  • Coordinating cargo transfer process with other FZEs in LADOL
  • Co-ordinate all Terminal Operations for company imports & exports at the LADOL FZE
  • Participating in all pre-cargo discharge meetings ahead of berthing with Port Operators and shippers? agents
  • Supervise and take reports of activities of Marine Cargo Surveyors for insurance purposes
  • Maintaining an efficient container tracking system and container return to shipping companies with all parties to control demurrage
  • Participating in Shipping Contracts, Procedures and Policy Formulation.
  • Any other activity or job function assigned to me by the Manager of the Department.
  • To be accountable for timely delivery of materials at COMPANY warehouses.
  • Ensure that all transactions of shipments are carried out in compliance with Nigerian laws and company policies.
  • Ensure that all COMPANY HSE rules and regulations are observed.

Job Requirements

  • Graduate in Management or Social Sciences with at least 2 years? experience in C&P, Transit, and or Logistic Operations.
  • Knowledge of UNISUP, MS Excel, MS word, Power Point

Application Closing Date
15th November, 2023.

How to Apply
Interested and qualified candidates should:
Click here to apply online

5.)?Subsea Hardware Engineer III

Location:?Lagos
Category: Others
Job Type: Contracts
Job Nature: Standard

Main Functions

  • Develop subsea hardware selection justification documents, product specifications, and other project-specific documents and drawings, including tree and manifold P&IDs.
  • Evaluate and comment on discipline engineering work performed both internally and by contractors and subcontractors to ensure that work is being executed in accordance with project specifications, company standards, and regulatory requirements.
  • Facilitates effective execution of disciplined engineering and design routines that align with the project’s goals, objectives, and procedures.
  • Assures accurate and timely communication among the project team and other company functions on discipline engineering activities, progress, and issues.
  • In addition to technical ability, they should demonstrate sound communication, facilitation, and interpersonal skills.

Tasks and Responsibilities

  • Steward discipline engineering queries from the Contractor and sub-contractors as well as technical information requests
  • Keep the lead engineer or engineering manager informed of discipline engineering progress, deviations, and execution concerns.
  • Participate in discipline engineering reviews at the contractor’s and subcontractor’s locations.
  • Drives and promotes capital efficiency in engineering design.
  • Support internal engineering general interest or global practice initiatives as requested by the supervisor.
  • Participate in pre-commissioning, system integration testing, installation, and commissioning activities of subsea hardware equipment. Participate in troubleshooting equipment problems with vendors, installation contractors, and other client operating affiliates.
  • Promote safety in all project aspects of vendor manufacturing assembly, testing, installation, and operations.

Job Requirements

  • B.Sc or M.Sc Degree in Mechanical, Aerospace, Electrical, Civil, or Chemical Engineering
  • Working knowledge of subsea hardware equipment, including horizontal and vertical trees, jumpers, manifolds, connection systems, and valves, as well as qualification, testing, and installation methods.
  • Be familiar with and have experience applying API 6A and 17D, and other relevant API, ISO, and ASME subsea hardware and piping standards.
  • Proficient in Microsoft Office suite of software programs
  • Read, write, and speak fluent English, especially as it applies to technical and business communications.

Application Closing Date
30th November, 2023. Amaiden Energy Nigeria Limited Job Recruitment (14 Positions)

Method of Application
Interested and qualified candidates should:
Click here to apply online

6.)?Drilling & Wells Cost Controller

Location:?Lagos
Employment Type: Contract

Job Description
The incumbent is required to:

  • Prepares annual budget (both Corporate & Partner) for entity in conjunction with technical responsible
  • Prepares revised forecast information based on latest work scope
  • Participates in NAPIMS Sub-Committee meetings to defend Budget / Performance in order to achieve the necessary approvals
  • Prepares all necessary documentation for the month end closure (manual accrual?s, SKF?s, etc.) to ensure an accurate financial performance
  • Ensures all tasks are carried out in order to achieve SOX compliance
  • Prepares monthly cost report with variance analysis to help technical responsible manage their budgets / costs
  • Provides monthly information for the NAPIMS cash call to ensure sufficient funding for the activities
  • Process and verify invoices to ensure timely payment
  • Schedules meetings monthly to discuss reports and finance related issues with Technical responsible.
  • Ad hoc variance analysis for District management / Corporate Finance
  • Periodic reconciliation of technical cost sheets with SAP Values to ensure adequate follow up of daily drilling cost.
  • Creation of RFS purchase orders and maintenance of schedules for proper cost follow up.
  • Liaison with Technical logistics and budget and reporting teams to ensure correctness of allocated cost.
  • Tasks very deadline driven to comply with both Corporate and Partner requirements
  • Works very closely with technical / budget responsible to ensure accurate financial information in line with work programs
  • Need for good management of RFS processes.
  • Supports the entity in financial matters so the technical personnel fully understand their budget / performance
  • Ensures all financial information is captured in an accurate, compliant and timely manner

Job Requirements

  • Bachelor’s Degree in a Finance or Engineering
  • 5 years Finance / Cost Control experience
  • Good systems knowledge, especially SAP and Excel
  • Good interpersonal / analytical skills.

Application Closing Date
30th November, 2023.

Method of Application
Interested and qualified candidates should:
Click here to apply online

7.)?Pipeline Engineer II

Location:?Akwa Ibom, Nigeria
Category: Piping, Pipelines
Job Type: Contracts
Job Nature: Standard

Main Functions

  • Evaluate and comment on discipline engineering work performed both internally and by Contractors and sub-contractors to ensure that work is being executed in accordance with Company specifications, company standards, and regulatory requirements.
  • Facilitates effective execution of discipline engineering and design routines that align with the team’s goals, objectives, and procedures.
  • Assures accurate and timely communication among the team and other company Functions on discipline engineering activities, progress, and issues. In addition to technical ability, they should demonstrate sound communication, facilitation, and interpersonal skills.

Tasks and?Responsibilities

  • Plan and manage the pipeline and subsea activities in early part of the project phases.
  • Provide pipeline engineering inputs.
  • Provide technical authority assurance role.
  • Define fit for purpose pipeline solutions. Amaiden Energy Nigeria Limited Job Recruitment (14 Positions)
  • Lead pipeline feasibility and concept select studies, performing pipeline routing studies, execute hydraulic analyses, perform onshore/offshore pipeline mechanical design including support for material selection, cost estimating and constructability reviews.
  • Project Management and supervision of 3rd Party Contractor activities, review, improve and approve Front End Engineering and Design, and Detailed Design documents.
  • Assess development risks, including HS&E assessment, and propose mitigation plan.
  • Plan and implement assurance process at key stages of the development.
  • Support the Business Planning and Work Program and Budget exercise.
  • Focus on Standard Solution & New Business Development opportunities from identify stage to Basis for Design.
  • Ensure deployment of new technology and drive applications gaining acceptance with the projects/assets leaders.

Skills and Qualifications

  • Bachelor’s Degree in Civil or Mechanical Engineering or related Engineering specialty or equivalent professional experience
  • Oil and gas experience preferred
  • Experience in dealing with front end project delivery
  • Robust experience in business and project planning.
  • Strong experience of working with sub-surface disciplines.
  • Requires strong knowledge of offshore facilities, and offshore facilities project delivery and awareness of worldwide practices, successes, failures and technical benchmarks.
  • Strong knowledge of discipline design standards, specifications, codes, and appropriate safety criteria
  • Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
  • Proficient in Microsoft Office suite of software programs
  • Read, write, and speak fluent English, especially as it applies to technical and business communications.

Application Closing Date
30th November, 2023.

How to Apply
Interested and qualified candidates should:
Click here to apply online

8.)?Budget Analyst

Location:?Lagos, Nigeria
Category: Others
Job Type: Contracts
Job Nature: Standard

Job?Description

  • Assist in the preparation and issuance of monthly Cash Call statements to Partners in line with the JOA,
    preparation of monthly cash flow forecast and other ad-hoc request from the Partners
  • Assist in the preparation of monthly Billing statements and Working Capital issued to Partners
  • Assist in the preparation of monthly Production Allocation Statements and Proceed Imbalance issued to Partners and NNPC respectively.
  • Assist in the preparation of monthly Production forecast Report and SEC production figures to Corporate Budget and Strategic Planning.
  • Assist in the computation of SEC Production for monthly reporting, Budget and PDC sessions and Planned Production Shutdown report.
  • Assist in the review and update of all WBS master data to ensure correct reporting parameters are used
    e.g. CAPEX/OPEX, JIB/JIBE codes, NNPC codes.
  • Assist in the preparation of Monthly Management Report & SOX Controls.
  • Provide status report on all SOX controls managed by the Department.
  • Provide Cost and Production performance reports to Corporate Budget in line with published timelines.
  • Provide support to Venture Management department and prepare prompt responses to queries received
    from Partners and Authorities.
  • Provide support to Cost Controllers during budget and performance reviews with NAPIMS ? SUBCOM
    and TECOM.
  • Follow up alignment of routine reporting format in line with Corporate Budget?s format and effect changes
    when/where necessary.
  • Requires good knowledge and application of clauses contained in the various Joint Operating
  • Agreements(JOA), Production sharing contracts(PSC), Carry Agreements, Memorandum of Understanding (MOU) with NNPC, Farm-in and Farm out Agreements
  • Requires strict compliance with dynamic accounting rules contained in Nigerian Accounting Standards (SAS), International Accounting Standards (IFRS/IAS), Petroleum Profit Tax acts, Sarbanes Oxley Act
  • Maintain contacts with the following teams: Cost Control, Third Party Accounting, Corporate Accounting, Joint Venture Management, Audit, Technical Logistics and Tax.

Accountabilities

  • Ensure the integrity of Production Allocation, Billing and Cash Call Statements issued to Partners
  • Ensure timely submission of all reports due to Partners in line with the JOA
  • Provide support during analytical reports to aid top management planning
  • Ensure internal compliance of all SOX documentations and update of SOXCM+ folder

Job Requirements

  • B.Sc in Accounting, Economics, or other related discipline
  • M.Sc and/or professional qualification (ACA/ACCA/CITN) an advantage

Experience:

  • 3 – 5 years? experience in accounting / finance environment, preferably upstream oil and gas industry

Essential Skills:

  • Advanced Excel, PowerPoint and other Microsoft office skills & SAP knowledge an advantage
  • Good organisational ability, interpersonal and analytical skills.

Application Closing Date
30th November, 2023. Amaiden Energy Nigeria Limited Job Recruitment (14 Positions)

How to Apply
Interested and qualified candidates should:
Click here to apply online

9.)?Telecoms Projects & Operations Engineer

Location:?Lagos
Job type: Contract
Category: Others

Main Function

  • Carry out technical engineering studies for the design, installation, and standardization of Telecom systems, mast, earthing, etc. in line with specifications and GS TEL installation rules.
  • Operation and maintenance of the following field systems and equipment: PA/GA, CCTV, GMDSS, Access control, Radar with AIS, UHF/VHF Radios, Satellite TV, Line of site/Non-line of site microwave links: WiMAX, 4G/LTE, Radar Beacon (RACON), Non-Directional Beacon (NBD), Video conference, Infrastructure monitoring systems
  • Prepares technical specifications and scope of work to approved standards for various Telecoms projects (O&G, evolution/revamp), evaluates technical bids prepares evaluation reports, and supervises the project deployment.
  • Prepare specifications for telecommunications service contracts and required equipment/services needed to perform the Annual Maintenance Contract for Telecoms critical equipment to maintain high availability and reliability. Carry out routine telecommunication assessment visits and propose improvements.
  • Supervise offshore Telecom specialists and assist in carrying out maintenance activities on Telecom systems.
  • Prepare technical reports, assist in the development of the 5-year work program, evaluate equipment obsolescence and propose replacement plans, and update engineering and technical documents and manuals.
  • Preparation of technical dossier (Scope of work) to request for quotation from contractors regarding telecommunication projects, and specific operations on systems.

Job Requirements

  • Minimum University Degree B.Sc. (Second Class lower) or HND (Distinction) Degree in Electrical, Electronics or Computer Engineering.
  • Minimum 5 years experience in telecommunication or network engineering, operation, and maintenance.
  • Good reporting, interpersonal, and communication skills
  • Knowledge and use of computer drawing and office applications

Application Closing Date
20th November, 2023.

How to Apply
Interested and qualified candidates should:
Click here to apply online

10.)?Commercial Advisor II

Location:?Lagos
Job type: Contract
Category: Others

Main Functions

  • Consult with the organization to provide specific knowledge and expertise related to the commercial or business environment.
  • Serves as subject matter expert to develop, and assess operations or current commercial strategy, guide client decisions, and make recommendations.
  • Improve organizational effectiveness via commercial practice improvement initiatives.
  • Promote fit-for-purpose use of commercial practices, standards, and tools.
  • Support prioritization of commercial opportunities or negotiations on behalf of the business.
  • Moderate to minimal work direction needed, highly skilled and knowledgeable on commercial or business subject matter expertise.

Job Requirement

  • Strong interpersonal and analytical skills.
  • Commercial or business expertise related to the subject.

Application Closing Date
20th November, 2023.

How to Apply
Interested and qualified candidates should:
Click here to apply online

11.)?Senior Safety Engineer

Location:?Lagos
Job type: Contract Amaiden Energy Nigeria Limited Job Recruitment (14 Positions)

Job Description
Service Dimensions:

  • Contribute to the definition and implementation of an effective HSE policy covering protection of personnel, care for the environment, preservation of installations and related reference system.
  • Implementation of CR-GR-HSE-301 on Technological Risk Management.
  • Contribute to prevention of Major Accident Hazards through implementation of barrier management solutions.

Activities
The incumbent is required to: Amaiden Energy Nigeria Limited Job Recruitment (14 Positions)

Ensure compliance to applicable local/international regulations and Company referential:

  • Make input on Technical Safety documents for facilities /assets design, operation, and abandonment, in conformity with Group, Industry, and Statutory requirements.
  • Provide Safety Engineering support on studies conducted internally and follow up Safety Engineering studies undertaken by Contractors as assigned by hierarchy.

Provide support to operated facilities:

  • Undertake periodic updates of facility Safety Concepts.
  • and make necessary inputs to all safety-related modifications and corresponding engineering documents to existing facilities (P&ID, ESD Logic, Fire and Gas Cause and effects charts, Active and passive firefighting, fire and gas detection, escape and evacuation route, Hazardous area classification, Safety layout, flare radiation)
  • Undertake the development, review, and update of Operational Safety Cases in line with regulatory (NUPRC) requirements for operated sites in Nigeria.

Risk Assessment:

  • Lead specific Safety Engineering studies/reviews in support of the Request for Modification (RFM) process and Downgraded Situations (DGS) ? HAZOP, HAZID, BowTie Assessment, etc.
  • Support operational entities in Derogation preparation.
  • Undertake flammable/toxic gas dispersion, fire, and explosion consequence modeling using PHAST software, and interpret results for the safe operation of oil and gas facilities.
  • Undertake Safety Integrity Levels (SIL) assessment process and SIL assignment for Safety Instrumented Systems within oil and gas facilities in line with GS GR HSE 306.

Major Risk Management:

  • Facilitate Safety and Environmental Critical Element (SECE) identification workshops and the follow-up of Safety Engineering responsibilities as specified in GS GR HSE 311.
  • Lead in major risk identification, develop risk reduction measures for managing technological risks, and monitor implementation in compliance with the group referential (GS GR HSE 312) for technological risk assessment (TRA).
  • Lead Major Risk awareness training and barrier verification exercises.
  • Promote Major Risk awareness within TUCN via the development of Process Safety Event articles for dissemination to operated assets.
  • Support Major Risk management implementation through the development of a dashboard for monitoring barrier status.
  • Provide process safety support to Engineering Construction and projects (ECP), Operational / Asset Operated by Others (AOBO) entities, and partners on risk management issues.

Job Requirements

  • B.Sc Degree or equivalent in Chemical, Petroleum, or related Engineering (an M.Sc. degree in Safety Engineering or similar is a plus.
  • Typically, 10 years of oil and gas industry professional experience of which at least 5 years in an equivalent position as Safety & Loss Prevention Engineer.
  • Good knowledge of Loss Prevention standards and procedures and major hazard legislation. Good knowledge of risk assessment techniques and management (HAZOP, HAZID, HAZAN, QRA) and other reviews.
  • Autonomous with investigation/observation skills, effective communication, and organizational capability.

Application Closing Date
20th November, 2023.

How to Apply
Interested and qualified candidates should:
Click here to apply online

12.)?Principal Electrical Maintenance Technician

Location:?Bonny Island, Rivers
Category: Electrical & Instrumentation
Job Type: Contracts
Job Nature: Standard

Description

  • Accountable for Electrical aspect of detailed planning (L3/4) of Computerised Maintenance Management System (CMMS) build scope of the pro project), KPI?s and progress measurement indicators. The CMMS scope includes SAP-PM, Spares and BOM in SAP-MM, Inspection/Corrosion management in S-IMS and quality interface with supporting systems including s-RBI, s-RCM, w-SIFPRO, AVEVA, SAP-DMS/SharePoint, etc.
  • Supervisor of Electrical discipline aspect of the project?s MRTA within ORCSU team.
  • Participate in all Maintenance Assurance-related reviews like Operability & Maintainability Workshop, Reliability Centred Maintenance Workshop etc.
  • Assist the Service contract holder for the project CMMS build services (TA CTR and CMMS contractor call-off contract).
  • Assist the Service contract holder for the project? MM/BOM build services (TA CTR and MM/BOM contractor call-off contract).
  • Jointly accountable for operation and maintenance readiness of Electrical scope of the clients project.
  • Participate in Pre-commissioning, Commissioning and Start-up activities (inspections, tests, completions walkdown, monitoring the closure of punch items etc.
  • Prior to commissioning, jointly accountable for validation of Electrical project scope delivery completeness, compliance with project specification and quality.
  • Jointly accountable for the project Electrical asset database.
  • Jointly accountable for obsolescence Management.
  • Jointly Accountable for the project to Asset Electrical-related MRTA deliverables- work procedures/instructions, Wiring diagrams, OEM operation and maintenance manuals etc.
  • Responsible for determining the level of Electrical-related aspect of Maintenance, Inspection, and Engineering activity necessary to meet reliability, availability, and plant life objectives (Production Promise).
  • Jointly accountability for the operation and maintenance readiness of the new Electrical Maintenance workshop and Electrical aspect of other project infrastructure facilities (Workshop, warehouse, passenger terminals, etc.
  • Interface with the client’s Asset Maintenance, Maintenance Support Services, and other departments on Electrical Maintenance aspect of project.
  • Accountable for full compliance with local HSE standards, regulations, permit & consents requirements.
  • Work within the Project and Asset teams to implement the Electrical aspect of MRTA related standards and processes. Amaiden Energy Nigeria Limited Job Recruitment (14 Positions)
  • Review all Maintenance related project deliverables (with bias for Electrical discipline), and HSE Procedures and providing feedback for final documentation.
  • Jointly accountable for setting up spare parts and Special Tools management for the project and ultimate delivery to Asset.
  • Ensure that the aspect of Electrical Maintenance of the? Project is implemented in compliance with Governmental regulations and Company Technical and Health, Safety, Security & Environmental (HSSE) standards.

Job Requirements
Experience:

  • Minimum of BSc. Degree or HND in an Electrical Engineering discipline
  • 10+ years? experience in MRTA in the oil and gas industry, at least 2 of which will have been in a major project environment.
  • Extensive field experience in managing maintenance system setup and delivery in a project or in an asset organization
  • The previous role will require experience in a similar role in major project delivery or assets involving complex processing, new technologies, and change management/business improvement.
  • Solid technical knowledge of maintenance management with MIE best practices and a hands-on approach to implementing planning and scheduling activities as part of coaching maintenance staff.

Skills & Requirements:

  • Strong supervisory and leadership skills in managing multi-discipline teams, effective at staff engagement
  • JCP profile as per Electrical Maintenance Engineering Upstream or Production Engineering Upstream Operations with skills/certification in:
  • SAP-PM and Master Data Governance (MDG) Tool
  • CMMS Foundational Data Amaiden Energy Nigeria Limited Job Recruitment (14 Positions)
  • CMMS Reporting and Analysis
  • Supply Chain Management
  • Project Management Certification (PMP)
  • Process Safety
  • Management of Change
  • Work Identification and Prioritization
  • Asset Reliability Strategy and Improvement
  • Manage Threats & Opportunities (MTO
  • Plant Maintenance Certification (SAP and/or CMRP)
  • Manage Equipment Care (MEC)
  • Maintenance Planning
  • Maintenance Scheduling
  • Maintenance Execution
  • Causal Learning
  • Turnaround Strategy and Organization
  • Turnaround Scope Development and Management
  • Turnaround Risks management
  • Business-focused, able to prioritize and maximize opportunities with no compromise on HSE.
  • Strong leader with proven ability to integration across multi-discipline and organizational work groups Excellent communication and presentation skills.
  • A good inter-cultural communicator is able to effect change through influence

Application Closing Date
30th November, 2023.

Method of Application
Interested and qualified candidates should:
Click here to apply online

13.)?Methods Engineer – Performance & Support

Locations:?Lagos and Port Harcourt, Rivers
Category: Others
Job Type: Contracts
Job Nature: Standard

Description
The Job holder adheres to the H3SEQ rules:

  • Be in constant alignment with H3SE Company rules, Procedures, Instructions and applicable legislation
  • Take the necessary measures to avert immediate threat of danger. Exercising caution as necessary to avoid danger to persons and installations or avoid pollution
  • Participate actively in H3SE meetings, training sessions and drills and co-operate actively in the execution of H3SE plans

Support for Supply Chain tools and systems:

  • Support a functional Hotline and ensure the resolution of various problems and issues arising from the appropriation of C&P tools.
  • Create and maintain a list of contact members in the User Departments and ensure this list is updated regularly
  • Suggest and propose regular revision of user manuals, procedures and work instructions pertaining to the use of SC Tools
  • Coordinate and ensure the regular training and support for external Suppliers on the e-sourcing tool and NIPEX platforms
  • Suggest and propose the delivery of Requests for Assistance (e.g. MTKs) for incidents or challenges requiring CC-SAP or other external assistance
  • Test and validate under custody of Performance & Tools Manager new solutions and upgrades of Supply Chain (SC) tools,
  • Participate in all specific actions (e.g. data cleaning) related to SC tools which can have impacts on SC processes

Training, appropriation and controls:

  • Suggest and prepare after SAP Lead User?s approval all requests for modifications to profiles, reference users or permissions in respect of SC Tools so as to ensure segregation of duties in SAP.
  • Coordinate and ensure the regular (re)training of users of all SC Tools and in particular, the training and induction of new users so as to ensure the optimal appropriation and use of these tools.
  • Perform regular controls to continuously improve the level of appropriation of SC tools so as to improve affiliates performance in ASAP and related audits (e.g. SOX audits)

Front Line contact for IS systems:

  • Monitor the general evolution of new technologies and their potential for process improvements
  • Check out and prepare resolution for all queries regarding Tools within the Client’s Supply Chain

Job Requirements

  • Minimum of a Second Class University Degree in Engineering, Business or a Supply Chain discipline plus 3 years experience in the Oil & Gas Industry. Ideally, the last 2 years should have been in a Supply Chain capacity preferably within any IOC.
  • Very good knowledge of C&P SC tools including UNISUP, Planning tools, e-sourcing tools & NipeX, in addition to other Business & Computing tools
  • Demonstrable commitment to excellence, respect for deadlines, team spirit and good communication skills
  • Computer literacy is mandatory and paramount on and off the job,
  • Have very good notions in training techniques and a good dose of diplomacy.

Application Closing Date
30th November, 2023.

Method of Application
Interested and qualified candidates should:
Click here to apply online

14.)?Well Performance Engineer Onshore

Location:?Bonny Island, Rivers
Category: Electrical & Instrumentation
Job Type: Contracts
Job Nature: Standard

Job?Description
Conduct functional roles related to Well Performance through the following:

  • Prognosis of well potentials from the results of well tests and interpretations provided by the Reservoir using the Prosper well model
  • Follow up on actual wells production or injection, while identifying well production shortfalls and analysing their origins
  • Co-ordinate reservoir, drilling/completion, and production multi-disciplinary expertise to propose curative actions for under-performing wells and quantifying the expected benefits
  • Schedule light well interventions considering production, drilling/completion and reservoir requirements and provide post-mortem analysis after corrective actions
  • Keep close contact with production operations to follow up on the day-to-day behaviour of the wells, and the implementation of necessary adjustments
  • Establish scope of requirements prior to any well completion or re-completion
  • Regular communications with the Well Performance engineering department (FP) in head office for technical support and feedback
  • Implement procedures for well start-up and clean-up and updating Well Performance indicators
  • Determine Well Metering frequency and final test data validation
  • Determine production allocation for each well
  • Ensure use of Prosper, IFM/IVM, MPG or equivalent models for Well Modelling to update well potential
  • Take responsibility for the Statement of requirements for Well Performance monitoring, mechanical survey, and scale removal along with the validation and interpretation of Well performance and integrity data
  • Take responsibility for SOR of Heavy Well maintenance for productivity reasons and provide an economical evaluation of Heavy well maintenance
  • Participate in the start-up of FCW (Full Control of Well) on the installations and ensure site (offshore) assistance to maintain usage of the system.
  • Optimize oil production via choke management and optimum gas lift injection
  • Design gas lift injection systems for valve change out in installed mandrels and well restart
  • Manage water and gas injection systems in cooperation with subsurface team
  • Be physically on site for well operations assistance
  • Participate in Sand Management for individual wells and field-wide.

Job?Requirements

  • Bachelor’s Degree in Engineering (or equivalent)
  • Professional experience of around 6 years in Oil & Gas production, including operational experience in reservoir, completion and stimulation or production
  • Good overview of the different parameters affecting the performance of a well, from the reservoir to the surface utilities.

Application Closing Date
30th November, 2023. Amaiden Energy Nigeria Limited Job Recruitment (14 Positions)

Method of Application
Interested and qualified candidates should:
Click here to apply online

 

Top Job Updates Delivered to your email.

Get Top Jobs Update right away.

More Jobs